DIY Dog Bed: 5 Easy Ways to Make a Bed Your Dog Will Love

A happy medium-sized dog sleeping curled up on a finished handmade dog bed with a fleece top and wooden base in a cozy living room

A good dog bed can cost $40 to $200, and plenty of dogs still end up sleeping on the rug instead. A diy dog bed solves both problems: you control the size, the firmness, and the fabric, and most of these builds cost less than $20 using things you already have at home. Whether you sew, own a drill, or can only tie knots, one of the five methods below will work for you.

Each build below includes a full materials list and step-by-step instructions, plus a size chart so the finished bed actually fits your dog. These projects also pair nicely with the layouts in our guide to dog room ideas if the bed will live in a dedicated corner.

What You Need Before You Start

Every method below uses the same basic toolkit: fabric scissors, a tape measure, a ruler, and chalk for cutting lines. Each project lists its own extra supplies.

Size the bed to your dog, not the other way around. Measure your dog from nose to tail base while they are stretched out sleeping, then add 6 to 12 inches. That total is the minimum length of the finished bed. A too-small bed is the number one reason dogs reject a new bed, so when in doubt, size up — dogs love room to sprawl.

Choose fabrics with safety in mind:

  • Pick tightly woven, durable fabrics — fleece, canvas, denim, and upholstery fabric all hold up to digging and nesting.
  • Avoid fabrics with loose loops or fringe your dog can chew off and swallow.
  • Skip buttons, zippers with exposed pulls, and glued-on decorations on any bed meant for a chewer; use hidden seams instead.
  • Wash all fabric before you start, especially thrifted or repurposed items, and never use stuffing from old pillows that smell musty or feel damp.
  • For puppies and senior dogs, a washable cover matters more than looks — plan for accidents.

Dog Bed Size Chart: Match the Bed to Your Dog

Use this chart as your starting point for every method in this guide. Measurements are for the finished sleeping surface.

Dog SizeWeightExample BreedsFinished Bed Size
SmallUp to 15 lbChihuahua, Yorkshire Terrier, Toy Poodle24 x 18 inches
Medium15–35 lbBeagle, French Bulldog, Corgi30 x 21 inches
Large35–65 lbBorder Collie, Australian Shepherd, Bulldog36 x 27 inches
Extra Large65–90 lbLabrador Retriever, Golden Retriever, Boxer42 x 30 inches
Giant90 lb and upGerman Shepherd, Great Dane, Mastiff48 x 36 inches

Curl-up sleepers can use the smaller end of their range; sprawlers need the full measurement. For raised beds, puppies, seniors, and short-legged breeds do best with a platform 4 to 7 inches off the floor.

Method 1: No-Sew Fleece Tie Bed

This is the classic diy dog bed no sew project — if you can tie a knot, you can finish it in under an hour. The tied fringe edge looks like a pet-store bed, and the whole thing goes straight in the wash.

Materials

  • 2 pieces of fleece, each cut to your bed size plus 8 inches on every side (for a medium bed, two pieces about 46 x 37 inches)
  • Polyester fiberfill, an old pillow, or folded blankets for stuffing
  • Fabric scissors, ruler, and chalk

Steps

  1. Lay the two fleece pieces on the floor with the right sides facing out and the edges aligned.
  2. Cut a 4 x 4 inch square out of each corner, cutting through both layers.
  3. Cut fringe along all four sides: strips 1 inch wide and 4 inches deep, again through both layers.
  4. Double-knot the top and bottom strips together around three full sides, pulling each knot snug.
  5. Stuff the bed through the open side. Fiberfill gives the softest result; a folded old blanket gives a flatter, firmer bed.
  6. Knot the final side closed. Trim any uneven fringe ends, and the bed is ready.
Hands tying fleece fringe strips together to make a no-sew dog bed on a craft table

Method 2: Old Sweater Bed

That stretched-out sweater in the back of your closet already smells like you — which is exactly why dogs love this bed. Your scent built into the fabric makes it an instant favorite for anxious dogs and new puppies.

Materials

  • 1 old sweater or sweatshirt (the chunkier, the better)
  • Fiberfill or an old pillow for the center
  • Extra stuffing, old towels, or fabric scraps for the arms
  • Needle and thread, or a sewing machine

Steps

  1. Lay the sweater flat and sew or stitch a line straight across the chest, just below the armpits.
  2. Stuff the body of the sweater firmly through the bottom hem until it forms a plump pillow shape.
  3. Stitch the bottom hem closed.
  4. Stuff both sleeves with towels or fabric scraps until they feel like firm bolsters.
  5. Wrap the sleeves around the stuffed body so they form a ring, tucking the cuffs together.
  6. Stitch the cuffs and the sleeves to the body at a few points so the ring holds its shape.

The result is a round bolster bed with a soft center — perfect for small and medium dogs who like to rest their chin on a raised edge.

A cozy dog bed made from an old knitted sweater with stuffed sleeves forming a bolster ring

Method 3: Wooden Pallet or Crate Raised Bed

A diy raised dog bed built from a pallet or wooden crate keeps your dog off cold floors, improves airflow in summer, and looks like real furniture. This is the sturdiest dog bed diy project in the list, and it suits large breeds that flatten soft beds in a month. If your dog spends time outside too, the same basic frame idea scales up — see our step-by-step on how to build an outdoor dog house.

Materials

  • 1 wooden pallet or large wooden crate (check pallets are stamped “HT” for heat-treated, never “MB” chemical-treated)
  • Sandpaper (80-grit, then 120-grit) and a sander or sanding block
  • 4 furniture legs or caster wheels, 4 to 6 inches tall (optional)
  • An old cushion, foam pad, or folded blankets cut to fit the top
  • Wood screws and a drill

Steps

  1. Inspect the pallet and pull out any protruding nails or staples. Replace cracked boards.
  2. Sand every surface, starting with 80-grit and finishing with 120-grit, until a hand slides across without snagging. This step matters — splinters are the main risk with pallet projects.
  3. Cut the pallet down to your target bed size if needed, keeping the slats evenly spaced.
  4. Screw the furniture legs or casters into the four corners for a raised finish, or leave the pallet flat on the floor for puppies and seniors.
  5. Lay the cushion or foam pad on top. For a finished look, wrap the cushion in fleece or canvas and staple the fabric to the underside of the top slats.
  6. Check the whole bed for wobble and sharp edges before inviting your dog up.
A raised dog bed built from sanded pallet wood with a thick cushion on top

A raised platform also helps older dogs with stiff joints: the firm, even surface is easier to get up from than a deep, squishy pillow bed.

A large dog resting comfortably on a raised wooden dog bed in a bright living room

Method 4: Sewn Pillow Bed with a Washable Cover

If you can sew a straight line, this is the most practical bed of the five: a simple inner pillow plus a removable diy dog bed cover you can unzip, wash, and replace without rebuilding the bed.

Materials

  • 2 yards of durable fabric (canvas, denim, or upholstery fabric) for the cover
  • 1 yard of plain cotton or muslin for the inner pillow
  • A zipper at least 24 inches long, or 4–6 snap buttons
  • Fiberfill, foam pieces, or shredded old towels for stuffing
  • Sewing machine, thread, pins, and scissors

Steps

  1. Cut two rectangles of muslin to your bed size plus 1 inch on each side for seams.
  2. Sew the rectangles together on three sides, stuff firmly, then sew the fourth side shut. This is your inner pillow.
  3. Cut two rectangles of your cover fabric the same size, plus 1 inch.
  4. Sew the zipper into one long edge, joining the two cover pieces.
  5. Sew the remaining three sides with the fabric inside out, then turn the cover right side out through the zipper.
  6. Insert the pillow, zip it closed, and shake the bed to settle the stuffing evenly.

Make a second cover while you have the machine out — you will thank yourself on laundry day.

Method 5: Suitcase or Drawer Bed

A hard-sided vintage suitcase or a spare dresser drawer makes an instant dog bed with built-in walls — no building required, and it suits small dogs and cats who like enclosed spaces.

Materials

  • 1 hard-sided suitcase or wooden drawer, cleaned inside and out
  • A pillow, cushion, or folded blankets sized to fit inside
  • 4 short furniture feet or felt pads (optional)
  • Sandpaper and paint, if you want to refresh the finish

Steps

  1. For a suitcase, remove the top half or prop it open securely — it must never fall shut on your dog. Many people remove the lid entirely.
  2. Clean the interior thoroughly and let it dry completely.
  3. Add short feet to raise the base off the floor, or stick felt pads underneath to protect your flooring.
  4. Drop in the pillow or cushion. It should fit snugly so it does not slide around.
  5. Sand and paint the outside if you like; let any paint cure fully for at least 48 hours before use.

How to Wash and Care for a DIY Dog Bed

A homemade bed stays fresh with the same routine as a store-bought one:

  • Weekly: Shake the bed outside and vacuum it to remove hair and grit before it works into the stuffing.
  • Every 1–2 weeks: Wash removable covers in warm water and dry them fully before putting them back on.
  • Monthly: Wash fleece tie beds and sweater beds whole (gentle cycle, low-heat dry). Air-dry foam and fiberfill inserts in the sun when you can.
  • As needed: Spot-clean wooden frames with a damp cloth; never soak pallet wood, which can warp and splinter.
  • Replace stuffing that has gone flat or lumpy — a bed that no longer springs back is not supporting your dog’s joints.

Frequently Asked Questions

How do I know what size dog bed to make?

Measure your dog nose to tail base while stretched out sleeping, then add 6 to 12 inches. Match that to the size chart above, and size up if your dog sprawls or is still growing.

What is the cheapest way to learn how to make a dog bed?

The no-sew fleece tie bed and the old sweater bed both cost almost nothing if you use fabric and stuffing you already own. Fleece remnants from a clearance bin usually run under $10 even for a large bed.

What stuffing is safest for a dog bed?

Polyester fiberfill is the standard choice — it is washable, affordable, and holds its shape. Avoid memory foam chunks for heavy chewers, since torn pieces can be swallowed, and never use bean-bag beads or loose foam peanuts.

How long does a DIY dog bed last?

With a washable cover and monthly fluffing, a sewn pillow bed or pallet bed easily lasts 1 to 3 years. Fleece tie beds and sweater beds typically last 6 to 18 months before the stuffing flattens, at which point you can restuff them in minutes.

Can I make one of these beds for a puppy?

Yes — choose the no-sew fleece bed or the suitcase bed, skip any small parts, and expect to wash it often. Make the bed to the puppy’s expected adult size and fold a blanket inside to fill the extra space while they grow.

Recent Post

Get Better Pet Care Tips

Join our Newsletter for the latest pet care advice training tips and healthy living ideas